IVA and wire wheel spinners

All things oily!
Post Reply
Redmax
Posts: 28
Joined: Tue Oct 04, 2016 2:51 pm

IVA and wire wheel spinners

Post by Redmax »

I currently have eared spinners like the ones below:

http://shop.mwsint.com/product_details.asp?id=437

Will the ears be an issue for IVA, or do I need to source some like these instead?

http://shop.mwsint.com/product_details.asp?id=355

Thanks

Jason
beng4
Posts: 105
Joined: Sat Jun 04, 2011 9:39 am

Re: IVA and wire wheel spinners

Post by beng4 »

Yeah you need the 2nd non eared spinners for the test. It is not so much that the ears may catch on things (they don't) it is because that as they are effectively a nut they can be torqued up to a specified amount rather than being bashed on by a mallet. If it's short term- just for the test I have some (rather dog eared ones) and a spanner if you would like to borrow them.
Redmax
Posts: 28
Joined: Tue Oct 04, 2016 2:51 pm

Re: IVA and wire wheel spinners

Post by Redmax »

Thanks beng, that's really generous. I'll take you up on your very kind offer - I'll obviously pay postage both ways.

I'll (try and) send you a private message.

Thanks again,

Jason
Redmax
Posts: 28
Joined: Tue Oct 04, 2016 2:51 pm

Re: IVA and wire wheel spinners

Post by Redmax »

I'm being defeated by the PM system - my message seems stuck in my outbox...

Could I trouble you to email me instead please - jason.redding95ATgooglemail.com.

Thanks

Jason
Post Reply