I was due to take part in both formations. But the rebuild of our engine, which began in September after we discovered an 18 inch crack in one of the crankcase halves, is STILL not complete. It’s due to be bench run this week………..
Up the Swanny. Again!
-
Splat
- Posts: 476
- Joined: Thu Jun 02, 2011 5:12 am
Re: Up the Swanny. Again!
Very frustratingly, no! Nor will I it be at Halfpenny Green on the 22nd of this. The plan there is to put up a 20-ship “80” formation (ten aeroplanes in each digit, with two whips (who fly above to check the spacing) and a camera ship.
I was due to take part in both formations. But the rebuild of our engine, which began in September after we discovered an 18 inch crack in one of the crankcase halves, is STILL not complete. It’s due to be bench run this week………..
I was due to take part in both formations. But the rebuild of our engine, which began in September after we discovered an 18 inch crack in one of the crankcase halves, is STILL not complete. It’s due to be bench run this week………..
-
Morris
- Posts: 146
- Joined: Wed Aug 08, 2018 12:05 pm
Re: Up the Swanny. Again!
What a shame, but great that it's back together. I hope the test runs goes well.
-
jonclancy
- Posts: 1040
- Joined: Tue Nov 01, 2011 9:30 pm
Re: Up the Swanny. Again!
WSC have found a Dutch buyer - off to Germany! Circuit Meppen.
-
biggles
- Posts: 348
- Joined: Tue Apr 10, 2012 8:10 am
Re: Up the Swanny. Again!
Somewhat of an opportunity for increased business for westy pattern part suppliers in the UK now I would have thought…! Unless they re-establish a UK online parts store…
-
Morris
- Posts: 146
- Joined: Wed Aug 08, 2018 12:05 pm
Re: Up the Swanny. Again!
From what I've heard, they are already speaking with potential UK agents.
Good intentions are one thing though, the reality may not align...
Good intentions are one thing though, the reality may not align...