K Series replacement
-
- Posts: 42
- Joined: Wed Jun 01, 2011 5:58 pm
Re: K Series replacement
Please do post links to as many pictures as you want to share. I always want to see new things.
-
- Site Admin
- Posts: 311
- Joined: Thu Jan 29, 2009 10:25 am
Re: K Series replacement
If you'd like an area in the gallery section for your photos, one can be setup for you.
Drop me a pm or email if that is of any interest.
Drop me a pm or email if that is of any interest.
-
- Posts: 70
- Joined: Fri Jul 29, 2011 6:20 pm
Re: K Series replacement
Hello Julian, I would be very interested in your pictures. malcolmlinder@btinternet.
Biggles, more about my eleven. its based on a series two Lotus eleven chassis but has Lotus eleven series one body much sleeker, although you cant get 8inch rear wheels on my car like Adam! I will try to add two pictures, one body off, Not my car but a similar one. second the car I used to race.
if these work I may add more or you could email and I could sed direct.
All the very best Malc
Biggles, more about my eleven. its based on a series two Lotus eleven chassis but has Lotus eleven series one body much sleeker, although you cant get 8inch rear wheels on my car like Adam! I will try to add two pictures, one body off, Not my car but a similar one. second the car I used to race.
if these work I may add more or you could email and I could sed direct.
All the very best Malc
-
- Posts: 29
- Joined: Sat Dec 03, 2011 8:09 pm
Re: K Series replacement
Now started to make some progress on this, too many excuses to list.
I'm currently trying to get all the "bits" put on the engine before I fix the engine mounts to the chassis plates. So far got alternator, remote oil filter, starter motor and reconditioned dry sump pump in place.
Latest bit soon to arrive is a Caterham clutch cable for the Type 9 gearbox that has had the inner cable shortened by 60mm by Speedy Cables.
I'm intending to use a standard Caterham K Series exhaust manifold mated (welded) to the original Westfield A series system.
Hopefully back with more updates sooner.
I'm currently trying to get all the "bits" put on the engine before I fix the engine mounts to the chassis plates. So far got alternator, remote oil filter, starter motor and reconditioned dry sump pump in place.
Latest bit soon to arrive is a Caterham clutch cable for the Type 9 gearbox that has had the inner cable shortened by 60mm by Speedy Cables.
I'm intending to use a standard Caterham K Series exhaust manifold mated (welded) to the original Westfield A series system.
Hopefully back with more updates sooner.
-
- Posts: 29
- Joined: Sat Dec 03, 2011 8:09 pm
-
- Posts: 318
- Joined: Tue Apr 10, 2012 8:10 am
Re: K Series replacement
now that's what I call a teaser, not even letting us see what's under there!
-
- Posts: 946
- Joined: Tue Nov 01, 2011 9:30 pm
Re: K Series replacement
Very subtle blister.
More pics! More pics! etc...
More pics! More pics! etc...
-
- Posts: 29
- Joined: Sat Dec 03, 2011 8:09 pm
Re: K Series replacement
Exhausting.. Here's a few photos of the exhaust I took the other day before they were wrapped. Shame to cover up the tubes but it keeps things cooler under the fibreglass.
-
- Posts: 70
- Joined: Fri Jul 29, 2011 6:20 pm
Re: K Series replacement
Hi Mark, well done with the conversion. how much hangs below the chasiss please?
Oh and some pics of engine installed if you would be so kind. where abouts are you based? would like to have a better look if possible.
All the very best Malc
Oh and some pics of engine installed if you would be so kind. where abouts are you based? would like to have a better look if possible.
All the very best Malc
-
- Posts: 29
- Joined: Sat Dec 03, 2011 8:09 pm
Re: K Series replacement
Hi Malc
This is a standard Caterham dry sump set up with the titan pump. Clearance on this is about the same as the A series was. There is absolutely no option to install a K series without a dry sump, you'd leave a trail of sparks behind you shortly followed by the sump contents.
I'm currently near Thame in Oxfordshire but shortly moving to Stratford upon Avon.
Very happy for you to come and have a look and I can share my mistakes with you.
Mark
This is a standard Caterham dry sump set up with the titan pump. Clearance on this is about the same as the A series was. There is absolutely no option to install a K series without a dry sump, you'd leave a trail of sparks behind you shortly followed by the sump contents.
I'm currently near Thame in Oxfordshire but shortly moving to Stratford upon Avon.
Very happy for you to come and have a look and I can share my mistakes with you.
Mark